Category Archives: HVAC
Central Air Conditioner Evaporator Service Coil Assembly
This evaporator service coil assembly (part number P140124) is for central air conditioners.Evaporator coil P140124 transfers heat from the refrigerant to the air blowing across the evaporator.A service technician should do this repair because it involves recovering and recharging refrigerant in the sealed refrigerant system.
Furnace Blower Fan Motor
Central Air Conditioner Air Handler Blower Motor
Central Air Conditioner Heat Pump Defrost Control
This heat pump defrost control (part number 1173637) is for central air conditioners.Heat pump defrost control 1173637 monitors the temperature of the heat pump coils and signals the control board to start or stop the defrost cycle.Shut off the circuit breaker to the air conditioner condensing unit before installing this part. Wear work gloves to
Furnace Intermittent Pilot Ignition Control Module
This intermittent pilot ignition control module (part number B1370724) is for furnaces.Intermittent pilot ignition control module B1370724 controls the spark for lighting the burner flame.Shut off the electrical power supply to the furnace before installing this part. Wear work gloves to protect your hands.
Furnace Fan Control Board
Central Air Conditioner Condenser Fan Motor, 1/6-HP
This condenser fan motor (part number 1052662) is for central air conditioners.Condenser fan motor 1052662 spins the fan blade that cools the refrigerant in the condenser. The motor is a single-speed 1,100-RPM motor with a 1-3/4-inch shaft.Shut off the circuit breaker to the air conditioner condensing unit before installing this part. Wear work gloves to
Furnace Inducer Vent Motor Assembly
This inducer vent motor assembly (part number 1014529) is for furnaces.Inducer vent motor assembly 1014529 removes fumes from the combustion chamber and blows them into the exhaust vent system.Shut off the electrical power supply to the furnace before installing this part. Wear work gloves to protect your hands.
Furnace Air Pressure Switch
Furnace Inducer Vent Gasket
Furnace Blower Fan Motor, 1/2-HP
This blower fan motor (part number 1013341) is for furnaces.Blower fan motor 1013341 circulates the air through the heating chamber and out into the room. Motor specifications: 4-speed, 3-1/2-inch shaft, 1,050-RPM and counterclockwise rotation.Shut off the electrical power supply to the furnace before installing this part. Wear work gloves to protect your hands.
Furnace Burner Roll-Out Limit Switch
This burner roll-out limit switch (part number 1013104) is for furnaces.Burner roll-out limit switch 1013104 detects when the flame flares out the front of the burner box and shuts down the burner to prevent overheating.A service technician should examine the furnace for potential problems and install this part.